Elevated · packaging review

AiR-ESS Gummies

Print files for the stand-up pouch, built on the die from the factory template and matched to the render your customer signed off on. Two options: with and without the AiR-ESS wording. Everything on this page is downloadable.

What this is

Every image here is rendered from the actual print artwork on the actual die — not a visualisation. The pouch shape, the zipper position, the window and the way the bottom curves under are all geometry, so what you see is what the plant makes.

Option A · everything · 21.6 MB Option B · everything · 21.6 MB

Each bundle is complete for that option — factory spread, artwork, separations, dieline check and the notes. The CMYK TIFFs are a separate download below (they are large).

Option A

With AiR-ESS

Elevated script + AIR-ESS GUMMIES

Factory spread The sheet you send the plant. 1624.7 x 316 mm, four layer groups on the template’s own grid. 7.3 MB Dieline check Artwork with the cut / crease / safe-area geometry drawn over it. For your eye, not for the plant. 7.1 MB Artwork — CMYK Front, back and gusset. 1:1, 3 mm bleed, live vector, fonts embedded. 7.1 MB Separations White underprint, spot UV and hot-foil plates, one PDF per panel per plate. 238 KB CMYK TIFFs 400 dpi, SWOP profile embedded, brand inks keyed to their locked builds. Includes the separation report. 8.7 MB

Option B

Without AiR-ESS

Elevated script + GUMMIES only

Factory spread The sheet you send the plant. 1624.7 x 316 mm, four layer groups on the template’s own grid. 7.3 MB Dieline check Artwork with the cut / crease / safe-area geometry drawn over it. For your eye, not for the plant. 7.1 MB Artwork — CMYK Front, back and gusset. 1:1, 3 mm bleed, live vector, fonts embedded. 7.1 MB Separations White underprint, spot UV and hot-foil plates, one PDF per panel per plate. 237 KB CMYK TIFFs 400 dpi, SWOP profile embedded, brand inks keyed to their locked builds. Includes the separation report. 8.5 MB

Still needed before plates

None of these are guesses in the artwork. Each one is a labelled, dimensioned empty reserve on the pack, so the layout already holds the right amount of room for the real content.

Piece count, net weight, total THC per packReserved on the back panel as a labelled empty box.
Ingredients + allergen declarationReserved. Comes from the final formulation.
Statutory symbol + warning wordingReserved, 35.2 x 19 mm. Set by the market of sale — counsel fills it.
Real GTINBarcode currently carries a placeholder, 0123456789012.
The die itselfGeometry is lifted 1:1 from the template you sent, but that is Higher Forms’ tooling. Get the plant’s confirmed dieline for your own PO before plates.
“10mg THC each” and “100% Live Sauce Infused”Carried over verbatim from your approved render. Confirm before plate — they are claims, not decisions I made.
Original wordmark vectorThe Elevated script was re-vectorised from the 558 px web PNG. Clean vector now, but send the AI/EPS if it exists and I’ll swap it for perfect edges.

Specification

Format	Stand-up pouch, zipper + tear notches, child resistant
Printed face	101.6 × 127 mm, front and back
Bottom gusset	101.6 × 50 mm
Bleed	3 mm all round
Safe area	5 mm sides and bottom
Zipper	26.5 mm from the top of the face
Window	89.6 × 12 mm clear, knocked out of the white plate and the varnish
Plates	CMYK + opaque white + spot UV + hot-stamp foil (optional)
Barcode	EAN-13 at 80% = 29.83 mm, the GS1 minimum for retail
Resolution	Type, badges and codes vector; painted frame 412 dpi native, placed at 400 dpi; TIFFs 400 dpi
Max ink coverage	291%, nothing over 300%